|
Buy DAS Array (RAID/JBOD)
|
|
DAS-RAID Storage Array w/Fibre Host (SAN Ready) |
DAS-RAID Storage Array w/SAS Host |
DAS-JBOD Storage Expander w/SAS Host |
DAS-RAID Storage Array w/SCSI Host |
|
|
|
|
|
| Performance: |
Host Channel Bandwidth: 4G Bits/s
Disk Channel Bandwidth (SATA/SAS): 3G Bits/s
Topology: Shared, Token-Ring/Shared Bus
- Throughput (Sequential): RAID-5 or 10:
- Single Channel: 400 MB/sec
- Dual* Channel : 800 MB/sec
- IOPS (Sequential):
- RAID-5 Read: 34,000+
- RAID-5 Write: 30,000+
Note:
- It support port aggregation* (max two), back at OS/Driver level through software RAID.
- RAID-10 IOPS will more than double the performance of RAID-5
|
Bus Bandwidth: 12G Bits/s
Disk Channel Bandwidth (SATA/SAS): 3G Bits/s
Topology: Serial, Point to Point
- Throughput (Sequential): RAID-5 or 10
- IOPS (Sequential):
- RAID-5 Read: 34,000+
- RAID-5 Write: 30,000+
Note:
- SAS uses Wide Ports, Scalable Bandwidth. It is point to point at 300MB/s and Full Duplex. SAS implements wide lanes at the port layer and is transparent to the driver level.
- RAID-10 IOPS will more than double the performance of RAID-5
|
Bus Bandwidth: 3.2G Bits/s
Disk Channel Bandwidth (SATA/SCSI): 3G Bits/s
Topology: Parallel
- Throughput (Sequential): RAID-5 or 10
Note:
- SCSI uses Wide Ports, Scalable Bandwidth.
- RAID-10 IOPS will more than double the performance of RAID-5
|
| Expansion: |
- One 4x mini SAS port for JBOD Expander.
- Daisy-Chain Up to 3 JBOD (3 x 16 = 48 disks) Expanders.
|
- One 4x mini SAS port for JBOD Expander.
- Daisy-Chain Up to 3 JBOD (3 x 16 = 48 disks) Expanders.
|
- Each JBOD Extender w/ 16 drives
- Host Server would require RAID PCie HBA
- Attach up to 3 (48 disk drives) additional JBOD’s Extenders.
Total drives supported by DAS + 3x JBOD = 64 Drives.
|
- One 4x mini SAS port for JBOD Expander.
- Daisy-Chain Up to 3 JBOD (3 x 16 = 48 disks) Expanders.
|
| Scalability: |
Usage of Fibre interface allows utilizing SAN
Capabilities for host connectivity and enterprise grade scalability; recommended
for scalability ( large deployments).
|
Usage of SAS interface is only recommended when higher transfer rate than Fibre
is desired such as high performance database. SAS is expandable but not scalable. |
SAS or/and SATA Drives Support. |
Usage of SCSI interface is not recommended as SAS is a better option with higher transfer rate. |
| Disk per Box: |
16 x 3.5” SAS or SATA-2 ; Supports 1TB SATA-2 Disks |
16 x 3.5” SAS or SATA-2 ; Supports 1TB SATA-2 Disks |
16 x 3.5” SAS or SATA-2 ; Supports 1TB SATA-2 Disks |
16 x 3.5” SAS or SATA-2 ; Supports 1TB SATA-2 Disks |
| Specifications: |
- Operating System: Platform Independent
- RAID Controller:
- 2x 4G Bits/s Fibre Port + 1 x Mini-SAS
- 2GB Cache w/Battery Backup
|
|
|
|
| Model: |
SD250-3F |
SD250-33 |
SD250-3 |
3163SA |
| MSRP: |
$ 7,649 (Disks Extra) |
$ 6,849 (Disks Extra) |
$ 3,499 (Disks Extra) |
$ 5,849 (Disks Extra) |