NETWORK STORAGE | SAS-to-SATA RAID Subsystem
Model Number |
SB-3163-S3A3 |
|
|
Form Factor |
3U Rackmount x 16 Disks |
Raid Engine |
Intel IOP 80321 XOR processor, 400MHz |
Cache Memory |
256MB, Up to 1GB DDR/ECC Memory; Optional 72 Hours Battery Backup |
Raid Levels |
RAID-0, 1, 3, 5, 6, 10, JBOD; HotSpare, HotSwap, Auto-Rebuild |
Raid Features |
|
Host Interface |
|
Disks |
16 x HotSwap 3.5" SATA II HDDs |
Backplane |
Cableless Backplane |
LCD & Indicator |
|
Raid Management |
|
Power Supply |
|
Dimention & Weight |
133mm(H) x 482mm(W) x 609mm(D) / 5.24" (H) x 18.98" (W) x 23.98" (D) 20.5kgs / 45.1Lbs (without drives) |
Scalability |
By 1-to-4 Octopus SAS Cable, (optional purchase ) |
Compatibility |
|
OS |
OS Independent & Transparent |
Host Bus Adapter |
|
SAS Host -to- SATA RAID SUBSYSTEM

FT-1603-SSA is intended to be an alternative choice to the SCSI-to-SATA RAID system. It is to address the challenges of : Stable Bus Connectivity, Low-Cost, Good Enough Performance, Large and Scalable capacity.
SAS Connectivity Advantages over SCSI
- Better Cabling resulting better signal integrity and longer cable allowed
- Native support Greater than 2TB per volume even for Linux/BSD/Unix/MAC, besides Windows. On the other hand, SCSI model is having problem doing that for non-Windows OS.
- Allow capacity expansion by using the 1-to-4 Octopus SAS cable to aggregate multiple RAID boxes. On the other hand, daisy-chaining multiple SCSI boxes will be come extremely unstable.
- Allow performance aggregation by using the 1-to-4 Octopus SAS cable to aggregate multiple RAID boxes and Stripe them in the OS
Typical Applications

- Archiving applications and Security DVR applications. Because this type of applications requires a very stable data stream flow, a lots of capacity at a very affordable price point, but do not need super fast performance.
Features & Benefits
- OS Independent & Transparent
- Support Two Servers/Applications Failover Clustering by providing dual SAS ports to hosts
- Single-Piece & Cableless Backplane Design
- Unique 1-to-4 Octopus SAS cable allows a single 8088 SAS connector to connect up to 4 RAID units.
- Product Manual
(1,781 kb) - Product Datasheet
(587 kb)

