IRON AMD MM2680 - Motherboard

Motherboard Key Features

Product SKUs  
MBD-H8DGi-F
  • H8DGi-F (Standard Retail Pack)
Dimensions
  • 12" x 13.05" (30.5cm x 33.2cm)
Physical Stats  
Form Factor
  • E-ATX Form
Dimensions
  • 12" x 13 " (30.5cm x 33.2cm)
Processor/Chipset  
CPU
  • Dual 1944-pin Socket G34
  • Supports up to two 16/12/8-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
Chipset
  • Dual AMD chipset SR5690/SP5100
System Memory  
Memory Capacity
  • Sixteen DIMM sockets
  • Support up to 256GB DDR3 1600/1333/1066 MHz memory
  • Quad channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
  • See Detailed Memory Support Matrix
Memory Type
  • DDR3 1600/1333/1066 MHz Registered ECC or unbuffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices  
SATA
  • AMD SP5100 (RAID 0, 1, 10)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 controller, Dual-Port
    Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200 16MB DDR2
Super I/O
  • Winbond® W83527 chip
Input / Output  
SATA
  • 6x SATA2.0 (3Gb/s) Ports
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 8x USB 2.0 ports
  • 2x Rear and 2x header (4 ports), 2x Type A
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x serial port header
Operating Environment / Compliance
RoHS
  • RoHS Compliant 6/6, Pb Free
Environmental Specifications
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
System BIOS
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
Expansion Slots  
PCI-Express
  • 3/1/2 PCI-E 2.0 x16/x8/x4 (in x8)
Management  
Software
  • IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
Power Configurations
  • ACPI Power Management
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery
PC Health Monitoring  
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 8-fan status tachometer monitoring
  • Up to eight 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control
      (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
Regulatory
FCC
  • Passed to meet FCC standard requirement

 

* Fully populated DDR2 667 or 800 will be downgraded to DDR2 533
^ Onboard SAS controller can support SR and IT mode, but not IR mode
** Opteron 237x, 238x, 239x, and 24xx supported