IRON AMD MM2650X4 - Motherboard

Motherboard Key Features

Physical Stats  
Form Factor
  • Proprietary Form
Dimensions
  • 6.5" x 16.64" (16.4cm x 42.3cm)
Processor/Chipset  
CPU
  • Dual 1207-pin Socket C32
  • Supports two 6/4-Core ready AMD Opteron™ 4100 Series processors
  • HT3.0 Link support
Chipset
  • AMD chipset SR5670 + SP5100
System Memory  
Memory Capacity
  • Twelve DIMM sockets
  • Support up to 128GB Reg. or 32GB Unb. ECC/non-ECC DDR3 1333/1066 MHz memory
  • Dual channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
  • See Detailed Memory Support Matrix
Memory Type
  • DDR3 1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.35V or 1.5V
On-Board Devices  
SATA
  • AMD SP5100 (RAID 0, 1, 10)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 controller, Dual-Port Gigabit Ethernet
  • 10/100/1000BASE-T support
Graphics
  • Matrox G200eW 16MB DDR2
Super I/O
  • Winbond® W83527 chip
Input / Output  
SATA
  • 4x SATA (3Gb/s) ports
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 4x USB 2.0 ports
  • 2x Rear, 1x header (2 ports)
VGA
  • 1x VGA port
Serial Port
  • 1x Fast UART 16550 serial port
Operating Environment / Compliance
RoHS
  • RoHS Compliant 5/6, Pb Free
Environmental Specifications
  • Operating Temperature: 10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5% to 95% (non-condensing)
System BIOS
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
Expansion Slots  
PCI-E
  • 1x PCI-e 2.0 x16 expansion slot
Management  
Software
  • IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
Power Configurations
  • ACPI Power Management
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery
PC Health Monitoring  
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 3-fan status tachometer monitoring
  • Up to three 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header

 

^ HT Link speed supporting depends on AMD Opteron processor spec.