Motherboard Key Features

Product SKUs  
MBD-X9SCI-LN4F -B
  • X9SCI-LN4F (Bulk Pack)
Physical Stats  
Form Factor
  • ATX
Dimensions
  • 12" x 9.6", (30.48cm x 24.4 cm)
Processor/Cache  
CPU
  • Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen Core i3 processors *** *
  • Socket H2 (LGA 1155)
System Memory  
Memory Capacity
  • 4x 240-pin DDR3 DIMM sockets
  • Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices  
Chipset
  • Intel® C204 PCH chipset
SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
  • SATA 3.0 6Gbps with RAID 0, 1
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® 82574L, 4x Gigabit LAN ports
  • Virtual Machine Device Queues High efficient I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
VGA
  • Matrox G200eW 16MB DDR2
Super I/O
  • Nuvoton WPCM450RA0BX
Input / Output  
Serial ATA
  • 6x SATA ports total (4x 3Gb, 2x 6Gb)
LAN
  • 4x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 8x USB 2.0 ports total (2x rear + 6x via header)
VGA
  • 1x VGA port
Keyboard / Mouse
  • 1x VGA port
Serial Port / Header
  • 2x Fast UART 16550 serial port (one header and one rear port)
Chassis ( Optimized for X9SCI-LN4F )
1U Chassis
  • CSE-113MTQ-560CB
  • CSE-113MTQ-563CB
  • CSE-113MTQ-R400CB
  • CSE-811T-250
  • CSE-811T-260
  • CSE-811T-300
  • CSE-811T-350
  • CSE-811T-410
  • CSE-811T-420
  • CSE-811T-420-INF
  • CSE-811T-520
  • CSE-811TQ-260
  • CSE-811TQ-280
  • CSE-811TQ-350B
  • CSE-811TQ-520B
  • CSE-811TQ-600B
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
Expansion Slots  
PCI-Express
  • 1 (x16) PCI-E 3.0 slot***
  • 1 PCI 32-bit slot
System BIOS  
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
Management  
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI / ACPM Power Management
  • Main Switch Override Mechanism
  • Power-on mode for AC power recovery
  • Internal/External modem ring-on
PC Health Monitoring  
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of 5 fan headers supporting up to 5 fans
  • Five 4-pin fan headers
  • 5x fans with tachometer
  • status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • FC temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • +5V Standby alert LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
OS Compatibility
  • Please see our OS Compatibility Chart