IRON Intel AR500 - Motherboards

Motherboard Key Features

Product SKUs  
MBD-X8DTL-iF -O
  • X8DTL-iF (Standard Retail Pack)
MBD-X8DTL-iF -B
  • X8DTL-iF (Bulk Pack)
Physical Stats  
Form Factor
  • ATX
Dimensions
  • 12" x 10" (30.5cm x 25.4cm)
Processor/Cache  
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
  • Intel® Xeon®Processor 5600 Series (Westmere)
  • Intel® Xeon®Processor 5500 Series (Nehalem-EP)
QPI
  • up to 6.4 GT/s
System Memory  
Memory Capacity
  • 6x 240-pin DIMM sockets
  • Supports up to 96 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB** , 16GB**
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices  
Chipset
  • Intel® 5500 (Tylersburg) chipset
  • ICH10R + IOH-24D
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows)
  • RAID 0, 1, 10 support (Linux)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC*
Network Controllers
  • 2x Intel® 82574L Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Super I/O
  • Winbond® 83627DHG-P chip
Input / Output  
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB rear ports
  • 1x USB on-board
  • 2x USB internal headers
  • Total 5 USB 2.0 Compliant
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header (Option)
Chassis ( Optimized for X9SCI-LN4F )
1U Chassis
  • CSE-111T-560CB
  • CSE-113MTQ-560CB
  • CSE-512F-520B
  • CSE-512F-520LB
  • CSE-512F-600B
  • CSE-811L-600B
  • CSE-811TQ-520B
  • CSE-811TQ-600B
  • CSE-813MTQ-350C
  • CSE-813MTQ-520C
  • CSE-813MTQ-600CB
2U Chassis
  • CSE-213A-R900LPB
  • CSE-216A-R900LPB
  • CSE-216E1-R900LPB
  • CSE-216E16-R1200LPB
  • CSE-216E2-R900LPB
  • CSE-523L-520B
  • CSE-823MTQ-R700LPB
  • CSE-823TQ-650LPB
  • CSE-825MTQ-R700LPB
  • CSE-825TQ-560LPB
  • CSE-825TQ-563LPB
  • CSE-825TQ-R700LPB
  • CSE-825TQ-R720LPB
  • CSE-826A-R1200LPB
  • CSE-826E1-R800LPB
  • CSE-826E2-R800LP
  • CSE-826TQ-R800LPB
3U Chassis
  • CSE-833T-550B
  • CSE-833T-650B
  • CSE-833T-R760B
  • CSE-835TQ-R800B
  • CSE-835TQ-R920B
  • CSE-836A-R1200B
  • CSE-836E1-R800B
  • CSE-836E2-R800B
  • CSE-836TQ-R800B
  • CSE-933E1-R760B
  • CSE-933E2-R760B
  • CSE-933T-R760B
  • CSE-936A-R1200B
  • CSE-936A-R900B
  • CSE-936E1-R900
Mid-Tower
  • CSE-733E-465B
  • CSE-733i-465B
  • CSE-733T-465B
  • CSE-733TQ-465B
  • CSE-733TQ-665B
Tower / 4U Rackmount
  • CSE-743i-R760
  • CSE-743T-665B
  • CSE-743T-R760
  • CSE-743TQ-865B
  • CSE-743TQ-865B-SQ
  • CSE-743TQ-R760
  • CSE-745TQ-800B
  • CSE-745TQ-920B
  • CSE-745TQ-R800B
  • CSE-846A-R1200B
  • CSE-846E1-R900B
  • CSE-846E2-R900
  • CSE-846TQ-R900B
  • CSE-847E1-R1400LPB
  • CSE-847E2-R1400LPB
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
Expansion Slots  
PCI-Express
  • 2 (x8) PCI-E 2.0 (1 in x16 slot)
  • 1 (x4) PCI-E 2.0 (in x8 slot)
  • 1 (x4) PCI-E (in x8 slot)
PCI
  • 2x 33MHz PCI slots
System BIOS  
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Management  
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
Power Configurations
  • ACPI / ACPM Power Management
PC Health Monitoring  
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
  • 4-Phase-switching voltage regulator
FAN
  • Total of six fan headers supporting up to 6 fans
  • Six 4-pin fan headers
  • 6x fans with tachometer status monitoring
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control (4-pin fan only)
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 6x fan connectors
  • PECI
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header